IBASE Technology UPC-6210 Series User Manual Download Page 32

Page: 32 / 65

UPC-6210 User Manual

3.3 Graphics Driver Installation

1. Click

Intel

and then

Intel(R) Baytrail Chipset Drivers

2. Click

Intel(R) Baytrail Graphics Driver

3. When the

Welcome

screen appears, click

Next

to continue.

4. Click

Yes

to agree with the license agreement and continue the installation.

5. The driver has been completely installed. Click

Finish

and restart the

computer for changes to take effect.

3.4 HD Audio Driver Installation

1. Click

Intel

and then

Intel(R) Baytrail Chipset Drivers

2. Click

Realtek High Definition Audio Driver

3. On the

Welcome

screen of the InstallShield Wizard, click

Next

for installation.

4. The driver has been completely installed. Click

Finish

and restart the

computer for changes to take effect.

Summary of Contents for UPC-6210 Series


































































Search results

Summary of Contents for UPC-6210 Series

Reviews:

Related manuals for UPC-6210 Series

Brands by name

Popular brands

IBASE Technology UPC-6210 Series, User Manual

Search results

Summary of Contents for UPC-6210 Series

Reviews:

Related manuals for UPC-6210 Series

Brands by name

Popular brands