background image

 

 

 

 

54 

SI-614 / SI-614-M User Manual 

 

3.  Sample Code: The file NCT5523D.CPP 

 

//--------------------------------------------------------------------------- 
// 
// THIS CODE AND INFORMATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY 
// KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE 
// IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR 
// PURPOSE. 
// 
//--------------------------------------------------------------------------- 
#include "NCT5523D.H" 
#include <dos.h> 
//--------------------------------------------------------------------------- 
unsigned int NCT5523D_BASE; 
void Unlock_NCT5523D (void); 
void Lock_NCT5523D (void); 
//--------------------------------------------------------------------------- 
unsigned int Init_NCT5523D(void) 

 

unsigned int result; 

 

unsigned char ucDid; 

 
 

NCT5523D_BASE = 0x4E; 

 

result = NCT5523D_BASE; 

 
 

ucDid = Get_NCT5523D_Reg(0x20); 

 

if (ucDid == 0xC4) 

 

 

 

 

 

//NCT5523D?? 

 

goto Init_Finish; } 

 
 

NCT5523D_BASE = 0x2E; 

 

result = NCT5523D_BASE; 

 
 

ucDid = Get_NCT5523D_Reg(0x20); 

 

if (ucDid == 0xC4) 

 

 

 

 

 

//NCT5523D?? 

 

goto Init_Finish; } 

 
 

NCT5523D_BASE = 0x00; 

 

result = NCT5523D_BASE; 

 
Init_Finish: 
 

return (result); 


//--------------------------------------------------------------------------- 
void Unlock_NCT5523D (void) 

 

outportb(NCT5523D_INDEX_PORT, NCT5523D_UNLOCK); 

 

outportb(NCT5523D_INDEX_PORT, NCT5523D_UNLOCK); 


//--------------------------------------------------------------------------- 
void Lock_NCT5523D (void) 

 

outportb(NCT5523D_INDEX_PORT, NCT5523D_LOCK); 


//--------------------------------------------------------------------------- 

dra

ft

Summary of Contents for SW-101-N































































Reviews: