IBASE Technology SI-122-N, User Manual

Page: 18 / 68

10 SI-122-N User Manual
2.1 Essential Installations Before You Begin
Before you perform the installations, release the following 6 screws, lift and
pull out the bottom cover first.
2.1.1 Memory Installation
To install or replace the module, locate the memory slot on the board and
perform the following steps:
1. Align the key of the memory module with that on the memory slot and
insert the module slantwise.
2. Gently push the module in an upright position until the clips of the slot
close to hold the module in place when the module touches the bottom of
the slot.
To remove the module, press the clips outwards with both hands.