IBASE Technology SE-103-N, User Manual

Page: 51 / 60

BIOS Setup
SE-103-N User Manual 45
4
4.5.1.1. Graphics Configuration
BIOS Setting Description
Primary Display
Select which of IGFX/PEG/PCI Graphics device should
be primary display or select SG for switchable Gfx.
Options: Auto, IGFX, PEG, PCI, SG
Select PCIE
Card
Selects the card used on the platform.
Auto skips GPIO based Power Enable to dGPU.
E1k Creek 4: DGPU Power Enable = Active Low.
PEG Eva1: DGPU Power Enable = Active High.
Internal
Graphics
Keep IGFX enabled based on the setup options.
Options: Auto, Disabled, Enabled
GTT Size Sets the GTT size as 2 MB, 4 MB, or 8 MB.
Aperture Size
Sets the aperture size as 128 MB, 256 MB, 512 MB,
1024 MB or 2048 MB.
Note: Above 4GB MMIO BIOS assignment is
automatically enabled when selecting 2048 MB
aperture. To use this feature, disable CSM support.
4.5.2 PCH-IO Configuration
BIOS Setting Description
SATA and RST
Configuration
Configures SATA devices.
PCH LAN
Controller
Enables / Disables the onboard NIC.
Wake on LAN
Enable Enables / Disables the integrated LAN to wake up the
system.
PS_ON Enable
Enables / Disables PS_ON support a new C10 state from
the CPU on desktop SKUs that enables a lower power
target that will be required by the California Energy
commission (CEC).