![background image](http://html1.mh-extra.com/html/ibase-technology/rm-f6-series/rm-f6-series_manual_3367572002.webp)
SMARC Evaluation Kit
2
2
Copyright © 2013 IBASE Technology Inc. All Rights Reserved.
Quick Start Guidez
Here is a step by step guide to boot up your SMARC:
a.
By
default
, the (Android) or (Linux OS) has been preloaded in the eMMC, (or SD card)
of the SMARC demo kit. All you have to do is
- Connect your SMARC with TV/LCD by using an
HDMI
cable,
- Or connect your LVDS panel by using LVDS cable if you have them
- Connect the device with 12V power input directly.
b.
To make a recovery SD card, please refer to Chapter 2.
c.
To use the root/ serial port debug function, please check Chepter3.2.1 (COM1 debug
cable setup) information.