IBASE Technology MT800M-AIC User Manual Download Page 61

Page: 61 / 71

BIOS Setup

MT800M-AIC User’s Manual

4.8 Save & Exit Settings

BIOS Setting

Description

Save Changes and
Exit

Exits system setup after saving the changes.

Discard Changes
and Exit

Exits system setup without saving any
changes.

Save Changes and
Reset

Resets the system after saving the changes.

Discard Changes
and Reset

Resets system setup without saving any
changes.

Save Changes

Saveschanges done so far to any of the setup
options.

Discard Changes

Discards changes done so far to any of the
setup options.

Restore Defaults

Restores /Loads defaults values for all the
setup options.

Save as User
Defaults

Saves the changes done so far as User
Defaults.

Restore User
Defaults

Restores the user defaults to all the setup
options.

Summary of Contents for MT800M-AIC








































































Search results

Summary of Contents for MT800M-AIC

Reviews:

Related manuals for MT800M-AIC

Brands by name

Popular brands

IBASE Technology MT800M-AIC, User Manual

Search results

Summary of Contents for MT800M-AIC

Reviews:

Related manuals for MT800M-AIC

Brands by name

Popular brands