![background image](http://html1.mh-extra.com/html/ibase-technology/mi999/mi999_user-manual_3365859020.webp)
12
MI999 User’s Manual
2.1
Installations
2.1.1
Installing the CPU
1.
Unlock the CPU socket by pressing the lever sideways, then lift up the
lever and the metal lid.
2.
Position the CPU above the socket such that the CPU corner aligns with
the gold triangle matching the socket corner with a small triangle.
3.
Carefully insert the CPU into the socket and push down the lever to
secure the CPU.
Then install the CPU cooler and fan back.
Note:
Ensure that the CPU cooler and the CPU top surface are in total contact to avoid
CPU overheating problem that would cause your system to hang or be unstable.
2.1.2
Installing the Memory
To install the modules, locate the memory slot on the board and perform the
following steps.
1.
Press the ejector tab of the memory slot outwards with your fingertips.
2.
Hold the meomry module and align the key of the module with that on
the memory slot.
3.
Gently push the module in an upright position unitl the ejector tabs of
the memory slot close to hold the module in place when the module
touches the bottom of the slot.
To remove the module, press the ejector tabs outwards with your fintertips to
eject the module.
Summary of Contents for MI999
