![background image](http://html1.mh-extra.com/html/ibase-technology/mi808/mi808_user-manual_3319134012.webp)
INSTALLATIONS
8
MI808 User’s Manual
Installing the Memory
The MI808 board supports two DDR3L-1600 memory slots.
Remarks:
MI808 supports two SO-DIMM (w/o ECC) modules. Total maximum
memory supported is 8GB.
Installing and Removing Memory Modules
To install the DDR3L modules, locate the memory slot on the board and
perform the following steps:
1.
Hold the DDR3L module so that the key of the DDR3L module
aligned with that on the memory slot.
2.
Gently push the DDR3L module in an upright position until the clips
of the slot close to hold the DDR3L module in place when the DDR3L
module touches the bottom of the slot.
To remove the DDR3L module, press the clips with both hands.
Summary of Contents for MI808
