10
MBN800 Series User Manual
2.1.3
CF Card & IPMI Module Installation / Replacement
If you need to install a CF card or an IPMI module, remove the device cover
firstly and then follow the instructions below.
Note:
1. IPMI slot is available for MBN800-8L only.
2. IPMI module is optional for purchase.
IPMI module:
1. Locate the IPMI slot and align the key of the module with that on the slot.
2. Insert the module slantwise and gently push the module straight down
until the clips of the slot close to hold the module in place when the
module touches the bottom of the slot.
.
To remove the module, press the clips outwards with your thumb and index
finger of both hands.
CF card:
Locate the CF slot and Insert the CF card to the slot.
To remove the CF card or IPMI module, pull it out with your thumb and index
finger directly.