![background image](http://html1.mh-extra.com/html/ibase-technology/mb930-r/mb930-r_user-manual_3281029005.webp)
INTRODUCTION
MB930-R User’s Manual
1
Introduction
Checklist
Your MB930-R/MB930F-R/MB930RF-R motherboard package should
include the items listed below:
•
The MB930-R/MB930F-R/MB930RF-R motherboard
•
This User’s manual
•
1 Back I/O shield
•
1 IDE cable
•
1 Floppy cable
•
1 SATA cable
•
1 Serial-Port cable
•
1 CD containing the following:
•
Chipset Drivers
•
Flash Memory Utility
Reminder
:
About IDE
The IDE connector on board does not support OS installation in hard
drive. A system hard drive connected to this IDE cannot be booted up to
OS.
About SATA
When using a legacy operating system, only one SATA controller is
available that supports SATA port 0 – 3 (CN8, CN9, CN10, CN11). It is
suggested that the legacy operating system is installed using any of these
ports.