IBASE Technology IP350, User Manual

Page: 18 / 28

INSTALLATIONS
14 IP350 User’s Manual
J1: System Fan Power Connector
J1 is a 3-pin header for the system fan. The fan must be a 12V fan.
Pin # Signal Name
1 Ground
2 +12V
3 N.C.
J2: IDE Connector
J2 is the 44-pin IDE connector that can connect to your IDE devices.
Signal Name Pin # Pin # Signal Name
Reset IDE 1 2 Ground
Host data 7 3 4 Host data 8
Host data 6 5 6 Host data 9
Host data 5 7 8 Host data 10
Host data 4 9 10 Host data 11
Host data 3 11 12 Host data 12
Host data 2 13 14 Host data 13
Host data 1 15 16 Host data 14
Host data 0 17 18 Host data 15
Ground 19 20 Key
DRQ0 21 22 Ground
Host IOW 23 24 Ground
Host IOR 25 26 Ground
IOCHRDY 27 28 Host ALE
DACK0 29 30 Ground
IRQ14 31 32 No connect
Address 1 33 34 No connect
Address 0 35 36 Address 2
Chip select 0 37 38 Chip select 1
Activity 39 40 Ground
Vcc 41 42 Vcc
Ground 43 44 N.C.
J3: Dual LAN Connectors
The two LAN connectors, supporting either two 10/100 Mbps LAN or
two Gigabit LAN controller, are on board the IP350 baseboard side by
side to each other.