IBASE Technology IDOOH-210-IR User Manual Download

Page: 9 / 74

IDOOH-210-IR User Manual

CHAPTER 1 INTRODUCTION

1.1 General Description

IDOOH-210-IR, an

21.5” ALL in ONE Panel PC utilizes Intel

E3800 series

processor to provide high computing performance and low power consumption

The IDOOH-210-IR operates silently and reliably in harsh environments. It comes

with two SODIMM slots to accommodate up to 8GB of DDR3L 1333MHz system

memory and one 2.5” SATA SSD for data storage. It is provided with two Gigabit

Ethernet, one RS-232/422/485 port. The unit is equipped with a front bezel with IR

touch screen that has IP65-rated protection.

The IDOOH-210-IR supports a wide range 90~240VAC power and automatically

temperature controlling system which makes it ideal for KIOSK, digital signage or any

other industrial applications worldwide.

IDOOH-210-IR overview

Summary of Contents for IDOOH-210-IR








































































Search results

Summary of Contents for IDOOH-210-IR

Reviews:

Related manuals for IDOOH-210-IR

Brands by name

Popular brands

IBASE Technology IDOOH-210-IR, User Manual

Search results

Summary of Contents for IDOOH-210-IR

Reviews:

Related manuals for IDOOH-210-IR

Brands by name

Popular brands