IBASE Technology IB903F, User Manual

Page: 35 / 58

DRIVERS INSTALLATION
IB903F User’s Manual 31
Device reset time-out
USB mass Storage device start Unit command time-out.
Device power-up delay
Maximum time the device will take before it properly reports itself to the
Host Controller.
‘
Auto
’
uses default value: for a Root port it is 100ms, for
a Hub port the delay is taken from Hub descriptor.
F81846 Super IO Configuration
Aptio Setup Utility
Main
Advanced
Chipset Boot Security Save & Exit
F81846 Super IO Configuration
→ ←
Select Screen
↑↓ Select Item
Enter: Select
+- Change Field
F1: General Help
F2: Previous Values
F3: Optimized Default
F4: Save
ESC: Exit
F81846 Super IO Chip F81846
► Serial Port 0 Configuration
► Serial Port 1 Configuration
Serial Port Configuration
Set Parameters of Serial Ports. User can Enable/Disable the serial port
and Select an optimal settings for the Super IO Device.