![background image](http://html1.mh-extra.com/html/ibase-technology/ib831/ib831_user-manual_604972044.webp)
BIOS SETUP
40
IB831 User’s Manual
Security Settings
This setting comes with two options set the system password. Supervisor
Password sets a password that will be used to protect the system and Setup
utility. User Password sets a password that will be used exclusively on the
system. To specify a password, highlight the type you want and press
<Enter>. The Enter Password: message prompts on the screen. Type the
password and press <Enter>. The system confirms your password by
asking you to type it again. After setting a password, the screen
automatically returns to the main screen.
To disable a password, just press the <Enter> key when you are prompted
to enter the password. A message will confirm the password to be
disabled. Once the password is disabled, the system will boot and you can
enter Setup freely.
BIOS SETUP UTILITY
Main
Advanced
PCIPnP
Boot
Security
Chipset
Exit
Security Settings
Install or Change the
Password.
<- Select Screen
↑↓
Select Item
+- Change Field
Tab
Select Field
F1 General Help
F10 Save and Exit
ESC Exit
Supervisor Password
: Not Installed
User Password
: Not Installed
Change Supervisor Password
Change User Password
Boot Sector Virus Protection [Disabled]
Summary of Contents for IB831
Page 1: ...IB831 VIA VX900 5 25 inch Disk Size SBC USER S MANUAL Version 1 0...
Page 4: ...iv IB831 User s Manual This page is intentionally left blank...
Page 8: ...INTRODUCTION 4 IB831 User s Manual Board Dimensions 203 W x 146 D mm...
Page 54: ...DRIVERS INSTALLATION 50 IB831 User s Manual This page is intentionally left blank...