![IBASE Technology IB827 User Manual Download Page 42](http://html1.mh-extra.com/html/ibase-technology/ib827/ib827_user-manual_3241870042.webp)
BIOS SETUP
38
IB827 User’s Manual
Onboard FDC Controller
Select
Enabled
if your system has a floppy disk controller (FDC)
installed on the motherboard and you wish to use it. If you install
an add-in FDC or the system has no floppy drive, select Disabled
in this field. This option allows you to select the onboard FDD port.
Onboard Serial/Parallel Port
These fields allow you to select the onboard serial and parallel ports and
their addresses. The default values for these ports are:
Serial Port 1
3F8/IRQ4
Serial Port 2
2F8/IRQ3
Serial Port 3
2A0/IRQ11
Serial Port 4
2A8/IRQ10
Parallel
Port
378H/IRQ7
UART Mode Select
This field determines the UART 2 mode in your computer. The default
value is
Normal
. Other options include
IrDA
and
ASKIR
.
Parallel Port Mode
This field allows you to determine parallel port mode function.
SPP
Standard Printer Port
EPP
Enhanced Parallel Port
ECP
Extended Capabilities Port
ECP+EPP Combination of ECP and EPP capabilities
Normal Normal function
PWRON After PWR-Fail
This field sets the system power status whether
on or off
when power
returns to the system from a power failure situation.
Summary of Contents for IB827
