34
IB113
4.
BSP User Guide ( for advanced software engineer only )
This Chapter is an example only,
and it is mainly for advanced SW engineers to build the image
for IBASE ARM PCB. Any other modification, new device or driver should be handled carefully.
4.1.
Building BSP Source
4.1.1.
Preparation
Suggested Host Platform: Ubuntu 10.04, 12.04, 14.04, x86 and x64 version
Install necessary packages before build:
apt-get install build-essential uboot-mkimage ia32-libs
Note: ** To simplify build process, please run build/installation with root on your x86 host PC.
**
4.1.2.
Installing Toolchain
** Before download the toolchain and BSP code, please install xz-utils to unpackage. **
Download and extract freescale toolchain (gcc-4.6.2-glibc-2.13-linaro-multilib-2011.12.tar.xz)
# assume your toolchain file is located at root home dir,
gcc-4.6.2-glibc-2.13-linaro-multilib-2011.12.tar.xz file in Downloads folder
:
** read words is your command **
sudo su
cd ~
mkdir -p ~/IB113_BSP ~/IB113_BSP/linux
cd ~/IB113_BSP/linux
tar Jxf gcc-4.6.2-glibc-2.13-linaro-multilib-2011.12.tar.xz
zetta@u1004x64:~$
sudo su
[sudo] password for zetta:
root@u1004x64:/home/zetta#
mkdir
–
p ~/IB113_BSP/ ~/IB113_BSP/linux
root@u1004x64:/home/zetta#
tar Jxf Downloads/gcc-4.6.2-glibc-2.13-linaro-multilib-2011.12.tar.xz -C
~/IB113_BSP/linux/
root@u1004x64:/home/zetta#
cd ~
root@u1004x64:~# ls
–
la IB113_BSP/linux/
lrwxrwxrwx 1 root root 65 11
月
3 11:19
fsl-linaro-toolchain
->
gcc-4.6.2-glibc-2.13-linaro-multilib-2011.12/fsl-linaro-toolchain
drwxr-xr-x 3 root root 4096 11
月
3 11:19
gcc-4.6.2-glibc-2.13-linaro-multilib-2011.12
