IBASE Technology BYTEM-W071-PC, User Manual

Page: 20 / 78

Copyright © 2013 IBASE Technology Inc. All Rights Reserved.
11 IBASE Technology Inc.
2.2 Installing the Memory
The IB897 board supports two DDR3L memory sockets for a maximum of 8GB.
Installing and Removing Memory Modules
To install the DDR3 modules, locate the memory slot on the board and perform the
following steps:
1. Hold the DDR3 module so that the key of the DDR3 module aligned with that on
the memory slot.
2. Gently push the DDR3 module in an upright position until the clips of the slot
close to hold the DDR3 module in place when the DDR3 module touches the
bottom of the slot.
3. To remove the DDR3 module, press the clips with both hands.
** Channel-A slot must be installed with memory module for booting up**