14
BYTEM-123-PC User Manual
2.1.2
Memory Installation
There are two SO-DIMM DDR3L memory slots inside BYTEM-123-PC and the
maximum memory supported is 8 GB.
The BYTEM-123-PC supports two SO- DIMM DDR3L memory slots for a
maximum total memory of 8GB. To install the modules, locate the memory
slot on the board and perform the following steps:
1.
Align the key of the memory module with that on the memory slot and
insertl the module slantwise.
2.
Gently push the module in an upright position until the clips of the slot
close to hold the module in place when the module touches the bottom of
the slot.
To remove the module, press the clips outwards with both hands.
Summary of Contents for BYTEM-123-PC
