IBASE Technology ASB200-918 Series, User Manual, Page: 20 / 75

12 ASB200-918 User Manual
2.1.2 Memory Installation
If you need to install or replace a memory module, perform the following
steps:
1. Locate the memory slot on the board.
2. Align the key of the memory module with that on the memory slot and
insert the module slantwise.
3. Gently push the module down in an upright position until the clips of the
slot close to hold the module in place when the module touches the
bottom of the slot.
To remove the module, press the clips outwards with both hands, and the
module will pop-up.
2.1.3 Mini-PCIe Card Installation
If you need to use a mini-PCIe card for expansion slots, follow the instructions
below for installation after you remove the device bottom chassis cover.
1. Align the key of the mini-PCIe card to the mini-PCIe interface, and insert
the card slantwise.
2. Push the mini-PCIe card down, fix it onto the standoff with a screw.