IBASE Technology AFW-3000, User Manual

Page: 43 / 51

BIOS SETUP
AFW-3000 User’s Manual 39
PNP/PCI Configurations
This option configures the PCI bus system. All PCI bus systems on the
system use INT#, thus all installed PCI cards must be set to this value.
Phoenix - Award WorkstationBIOS CMOS Setup Utility
PnP/PCI Configurations
Reset Configuration Data
Disabled ITEM HELP
Resources Controlled By
Auto (ESCD)
IRQ Resources
Press Enter
DMA Resources
Press Enter
PCI/VGA Palette Snoop
Disabled
Menu Level
Default is Disabled.
Select Enabled to reset
Extended System
Configuration Data
(ESCD) when you exit
Setup if you have
installed a new add-on
and the system
reconfiguration has
caused such a serious
conflict that the OS
cannot boot
PNP OS Installed
Enable the PNP OS Install option if it is supported by the operating
system installed. The default value is
No .
Resources Controlled by
This PnP BIOS configures all of the boot and compatible devices with
the use of a use a PnP operating system such as Windows 95.
IRQ / DMA Resources
These fields allow you to configure the IRQ / DMA Resources.
PCI/VGA Palette Snoop
Some non-standard VGA display cards may not show colors properly.
This field allows you to set whether or not MPEG ISA/VESA VGA
cards can work with PCI/VGA. When this field is enabled, a PCI/VGA
can work with an MPEG ISA/VESA VGA card. When this field is
disabled, a PCI/VGA cannot work with an MPEG ISA/VESA card.