9
ENGLISH
Troubleshooting
1. The switch does not toggle between ON and OFF.
• Check that the plug has been connected correctly.
• Check that the equipment to which the foot switch is connected
has been set up correctly.
• Check that the equipment to which the foot switch is connected is
compatible with a latch-type foot switch.
• Check that the equipment to which the foot switch is connected
has the power turned on.
2. The nut on the switch is loose.
Unplug the switch from the equipment to which it is connected.
Loosen the four screws on the underside of the switch and re-
move the back cover. Hold the switch down as you tighten the nut.
If you do not hold it down, the lead wire may be cut.
In the case of defects
This product has passed exhaustive inspections before being
shipped from the factory. Ensure that the above procedures are
carried out when a problem is thought to exist. Contact your dealer
in the unlikely event that an abnormality occurs during use. Also
ensure that the symptoms of the problem are explained in detail
when requesting repair in order to facilitate swift handling.
