9
2.1 System Requirements
CPU: Pentium 500MHz or above.
Hard Disk: 50MB available space.
Operating System: Windows 8/7/VISTA/XP (SP2 and above), Mac OS X 10.4.9 and
Later, Up to X10.6.0.
Display Resolving Power: 800 × 600 pixels or above (1024 × 768 is recommended).
Interface: Standard USB 2.0 interface.
Web Browser: Internet Explorer 6/7/8, Safari3/4/5.
One or more computing devices that support Wi-Fi (802.11b/g/n).
3. Power ON/OFF the Router
Press the power On/OFF switch more than 3seconds until OLED display shows “iBall” to
turn on the device.
Press th
e power ON/OFF switch more than 3seconds until OLED display shows “Power
off” to turn off the device under its operational state.
4. Turn Router to Wi-Fi Mode
Step I
：
Turn on the Router
·
Power ON the Router.
·
Switch the Router to 3G mode, wait for the data indicator light till blue
，
you can access to
the internet after that.
Step II
：
Establish a Wi-Fi connection
(Connect Computer for example)
1. Choose Start => Control panel =>
Network Connections => Wireless Network
connection.
Note
:
Before establishing a Wi-Fi
connection, it must ensure that the computer has been equipped with a wireless card. If
the Computer indicates the existence of wireless networks, then the wireless card can be
used. Otherwise, you need check whether the wireless card can work.
2. Click to check the available wireless networks, there will show the list of network
connections.
3. When the connection between user terminal and Router and click 'Connect'.
.