iBall BTM72, User Manual, Page: 7 / 8

6
Remarks:

Not all the mobile phones support all the functions listed above. Please refer to
your mobile phone user manual for further information.

Some functions and indication tones may vary with different mobile phones.

For some mobile phones, when you press the answer button on the phone, the
conversation will be sent to the mobile phone. At this time, you may switch the call to
the headset through the conversation switching function of the headset or operating
on your mobile phone. Please refer to your mobile phone user manual for further
information.
5 LED indicator light
1) When it is charging
LED indicator light The status of the headset
The red indicator light is on Charging
The red indicator light is off Finish charging
2) When it is not charging
LED indicator light The status of the headset
The red and blue indicator lights
flash alternately Pairing mode
The blue indicator light flashes
1 time every 1 seconds
Standby mode (not connected with
Bluetooth device)
The blue indicator light flashes
1 time every 4 seconds Standby mode (already connected
with Bluetooth device)
The blue indicator light flashes
1 time every 1 seconds Coming call
The red indicator light flashes Low power

Care and maintenance
Please read the following suggestions carefully, that will help you to fulfill any warranty
obligations and enjoy this product for many years.
•
Keep dry and don’t put it in the dump place, so as not to affecting the internal circuit of
product.
•
Don’t put the product under the sunlight or place in hot areas. High temperature will
shorten the life of electronic device, destroy the battery, or distort certain plastic.
•
Don’t expose the product in the cold areas. It may damage the internal circuit board.
•
Don’t try to take apart the product. It may damage the product if you are not professional
and void warranty.
•
Don’t fall off on the floor or knock the hard substance. It may damage body.
•
Don’t use intensify chemical or detergent to clean the product.
•
Don’t scrap the surface with sharp things.
If the product can’t work normally, please send it to the nearest iBall Service Center. The
staff will help you to solve the problem warm.