300M Wireless-N ADSL2+ 3G & Broadband Router iB-WRA300N3GT
4
Rear Panel
The following table describes the interfaces and buttons of the device:
Interface
Description
ON/OFF
Power switch, power on or power off the device.
Power
Power interface, for connecting to the power adapter.
Wireless /
WPS
z
Press the button and hold it for 1 second to 5 seconds,
to enable Wireless.
z
Press the button and hold it for more than 5 seconds,
to enable WPS function.
Reset
Reset to the factory default configuration. Keep the device
powered on, and insert a needle into the hole for 3 seconds,
then release it. The device is reset to the factory default
configuration.
USB
USB port, for connecting the 3G network card or other USB
storage devices.
LAN4/3/2
RJ-45 interface, for connecting to the Ethernet interface of a
PC or the Ethernet device through Ethernet cable.
LAN1/WAN
This Ethernet RJ-45 interface has two functions.
Worked as a WAN interface that connects to the WAN
for Broadband connection.
Worked as a LAN interface that connects to the LAN
port of the computer.
DSL
RJ-11 interface, for connecting to the DSL interface or a
splitter through a telephone cable for connection.
Summary of Contents for baton iB-WRA300N3GT
Page 1: ...300M Wireless N ADSL2 3G Broadband Router Model No iB WRA300N3GT Ver 1 0 0...
Page 19: ...300M Wireless N ADSL2 3G Broadband Router iB WRA300N3GT 14 Figure 2 Status 2 Figure 3 Status 3...
Page 26: ...300M Wireless N ADSL2 3G Broadband Router iB WRA300N3GT 21...
Page 42: ...300M Wireless N ADSL2 3G Broadband Router iB WRA300N3GT 37...
