iB-W4GX150N
4G Wireless-N Router
-4-
1.4 Panel Layout
1.4.1 The Front Panel
Figure 1-1 Front Panel sketch
The Router’s LEDs and the WPS/Reset Button are located on the front panel (View from left to
right).
Name
Status
Indication
PWR
On
Power is on.
Off
Power is off.
SYS
On
The Router is initializing.
Flashing
The Router is working properly.
Off
The Router has a system error.
WLAN
Flashing
The Wireless function is enabled.
Off
The Wireless function is disabled.
WAN,
LAN1-4
On
A device is linked to the corresponding port but there is no activity.
Flashing
An active device is linked to the corresponding port.
Off
No device is linked to the corresponding port.
3G
On
The USB 3G dongle is connected.
Flashing
Data is received or sent through the 3G dongle.
Off
No device is linked to the USB port.
WPS/Reset
Slow Flash
A wireless device is connecting to the network by WPS function.
This process will last for about 2 minutes.
On
A wireless device has been successfully added to the network by
WPS function. The LED will keep on for about 5 minutes.
Quick Flash
A wireless device has failed to be added to the network by WPS
function.
Table 1-1 The LEDs description
Note:
1. When a device has been successfully added to the network by WPS function, the WPS
LED will keep on for about 5 minutes and then turn off.
2. When pressing and holding the WPS/Reset Button for more than 5 seconds, you will reset
the router.
