iB-WPA300N
300M MIMO Wireless-N PCI-E Adapter
4
Chapter 2 Installation
Please install the PCI Express adapter into your computer before installing the driver and
utility software from the Resource CD.
2.1
Hardware Installation
1. Turn off your computer and unplug the power cord from the computer.
2. Open the case and locate an available PCI Express slot. Remove the metal slot cover on
the back of the PC. Keep the screws. Turn to your computer manufacturer for
instructions if needed.
3. Insert the PCI Express adapter into the PCI Express slot. Make sure that all of its pins
have touched the slot's contacts. Once the adapter has been firmly inserted, screw its
fastening tab. Then, close your PC case.
4. Insert the power cable back into the computer and turn on your computer.
)
Note:
When the hardware has been successfully installed on your computer, you will be prompted
'
Found New Hardware Wizard
' (as shown in Figure 2-1 and Figure 2-2); please click
Cancel
, and then follow the
Software Installation
steps to install driver and utility for your
adapter.
Figure 2-1 Found New Hardware Wizard in Windows XP
