iBaby MonitorUser Manual
18
Answer: The green flashes slowly, indicating that the device is connected to your
WI-FI but has not been activated on the server. Please exit the app from the
background of the mobile phone, then run the APP, and turn off the router and device.
If it still doesn't work, please re-install it in a different period of time and
the device does not need to be reset.
Question 4 When adding equipment, stuck in the next step, what is the reason?
Answer: The reasons and solutions are as follows
1) Please use the original iPhone data cable
2) Please make sure the phone is connected to Wi-Fi
3) The device is plugged in and the startup is completed (the LED status light behind iBaby, the
red flashes slowly)
4) The device is powered up and restarted.
Question 5 The home has replaced the new WI-FI, how to install the device?
Answer: If you have an Apple device (iPhone or iPad), you need to use a USB cable to reconnect
your Apple device and iBaby. Click Allow WI-FI to share. If you don't have an Apple device,
you need to RESET iBaby and reinstall it. RESET method, see question 4.4 in section 4.4.
Question 6 I forgot my login password, how do I do this?
Answer: If you have forgotten your login password, enter the email address you originally
registered, and click Send. A link to reset your password will be sent to your email address.
Please log in to the mailbox within one hour and click the password link to set a new login
password.
Summary of Contents for M2C
Page 1: ...iBaby Labs Inc...