IBA MS8xICP, Manual

Page: 16 / 29

Manual ibaMS8xICP
16
Issue 1.7
8.3.1 Update via Web Interface
Important note
The Web interface is available only with the central unit ibaPADU-S-IT-2x16.

Start the website of the iba-modular system in your browser and select the central
unit.

On the “update“ tab, click on the <Browse…> button and choose the
<padusit2x16_ v[xx.yy.zzz].iba> update file.

By clicking on <Start Update>, you start the update.
Figure 4: Update via Web interface
8.3.2 Update via ibaPDA

Open the ibaPDA I/O Manager and choose your iba-modular system in the tree
structure.

On the “Diagnostics“ tab, click on the <Write firmware> button and choose the
„padusit2x16_v[xx.yy.zzz].iba“ or „paduscm_v[xx.yy.zzz].iba“ update file.

You start the update by clicking on <OK>.
Figure 5: Update via ibaPDA
Important note
When updating the iba-modular system, a possible autostart of the ibaLogic PMAC is
deactivated and the existing ibaLogic-V5 application deleted. Furthermore, an update
of the ibaLogic-V5 software (ibaLogic Clients) might be necessary.