IBA MBox, Manual

Page: 12 / 35

Manual ibaMBox
12
Issue 1.3
5 System requirements
5.1 External data acquisition
When using the ibaPADU-S-CM or ibaPQU-S central units, an external notebook (or PC)
with ibaPDA is required for data acquisition.

AC 100 / 240 V (±10%) power supply

Notebook with the following minimal requirements:

2 GHz Core2Duo or better

At least 2 GB RAM

At least 10 GB of free space on the hard disk for measurement values

ExpressCard slot
You can find suitable notebooks on our homepage, http://www.iba-ag.com .

ibaFOB-io-ExpressCard

An ibaNet fiber optic patch cable (duplex) for connecting the central unit and note-
book

ibaPDA from version 6.36.0
5.2 Internal data acquisition
The ibaDAQ-S central unit enables data acquisition and storage on the device. External
input devices are required for operation and configuration. Alternatively the configuration
can be done using an ibaPDA client that has access to ibaDAQ-S over the network.

AC 100 / 240 V (±10%) power supply
Optional

External input devices for operation: monitor, keyboard and mouse

ibaNet fiber optic patch cable (duplex) for connecting additional iba devices
With the ibaCMU-S central unit, the data is also stored on the device. However, the
ibaCMC condition monitoring center, which is connected via the network, is required for
configuration and visualization.

AC 100 / 240 V (±10%) power supply

ibaCMC Condition Monitoring Center (only for configuration)

Network connection to ibaCMC