Manual
ibaMS16xDI-24V/-220V
22
Issue 1.4
9
iba Applications
9.1
Configuration in ibaPDA
You can configure the signals with the I/O Manager of ibaPDA. If the iba-modular system
is already installed and you want to add a new module, click on „Read configuration from
device“. The module will be detected automatically.
Figure 12: Automatic detection of the module
Note
The automatic detection requires a bidirectional FO connection from the ibaPDA
computer to the central unit.
Other documentation
If you want to install the iba-modular system at first, refer to the manual of the central
unit, chapter “Configuration with ibaPDA”.
If the module is detected, click on the module in the signal tree and the “General” tab
appears.
Note
The menu interface in ibaPDA is similar for the ibaMS16xDI-24V and ibaMS16xDI-220V
modules.
Figure 13: I/O Manager ibaMS16xDI-24V – General tab
