Manual
ibaDAQ
36
Issue 1.1
If this attempt is successful, the measurement is restarted automatically with the en-
abled module. If this option is not enabled, ibaPDA will not start the measurement if
it cannot establish a connection to the device.
More functions
Read configuration from device
Reads the configuration saved most recently from the device.
Click <OK> or <Apply> to apply the modified settings.
10.3.2 Backplane bus – Diagnostics tab
Figure 28: Backplane bus module – Diagnostics tab
The "Diagnostics" tab contains information on hardware, firmware and FPGA version as
well as the serial number of the central unit and of the connected modules.
10.3.3 Backplane bus – Analog tab
The "Analog" tab is only displayed when acquisition with analog input modules has been
started.
In the list, you can see the configured analog signals and the current values.
Figure 29: Backplane bus module – Analog tab
