Manual
ibaDeskline SAS
18
Issue 1.4
6
Installation, connection and first switching on
6.1
Safety instructions
Electric Shock!
Never use the device with a damaged mains cable!
Connect the device to one supply voltage only according to specifications on the built-
in power supply unit!
Always use a socket equipped with earthing contact! Use a terminal strip with overvolt-
age protection or an uninterruptible power supply (UPS)!
Connect the device only to earthed power networks (TN-networks according to
VDE 0100 Part 300 or IEC 60364-3)!
The operation via ungrounded networks or networks (IT networks) earthed via imped-
ance is not permitted!
Never put a damaged device into operation!
6.2
Setting up
Place the device only in the location which has the following properties:
Stationary
Shock-free
In the protected room, for example switch cabinet
Dust-free and dry environment
Even and non-slip base
Note
If you embed the device, observe the minimum bending radii of the cables and lines.
The mounting clearance must be at least 150 mm from the rear wall.
Ensure sufficient air circulation.
