3. Operation procedures for the WiFi Transceiver
1) SD card slot
2) USB interface
3) REC Button
4) WI-FI On/ Off Button
5) Power Button
6) Microphone
7) Red LED (Red/No SD Card)
8) Green LED (WI-FI / Client)
9) Blue LED (Power ON)
10 ) Analog Audio / Video In
Before the operation procedures , please make sure the A/V signal is plug into (10) A/V input slot.
1.) Insert the Micro SD card into (1):
Place the SD Card into SD Card Slot, Press again for take out the SD Card.
2.) Plug in the Micro USB 5 V (DC) power supply to (2)
3.) Power On: Press button (5) of the device. Press again for powering off.
Note: The default setting of the device as you power it on, its WiFi would be turn on and start recording.
4.) Wi-Fi On/Off: Press button (4) to turn on or turn off WiFi
5.) REC On/Off: Press button (3) to turn on or stop Recording.
6.) WiFi Direct / Wi-Fi Client Switch: Press button (4) for 3 sec. to switch the operational mode between
WiFi- Direct or Wi-Fi Client mode. (please check next page for client mode information)
7.) Rest Wi-Fi to default: Hold the button (4) for 10 sec.
LED light indications on the device:
1.) Blue LED Light On
：
Power On
2.) Red LED Light On
：
Please check the SD card. (Check the memory card)
Red LED Light Blinking
：
Recording
3) Green LED Light On
：
WI-FI On
Green LED Light Blinking
：
WI-FI Direct / WI-FI Client connecting
Green LED Light Continue Blink 2 times and stop one sec.
：
Enter Client, But no connection.
www.iat101.com www.peephole-store.com
P10
