I A S U S _ X S O U N D 3 _ O P E R AT I N G I N S T R U C T I O N S _ 2 0 2 1
6
E A R T A B ( S O L D S E P A R A T E LY )
T R O U B L E S H O O T I N G
• Ensure the XSound 3 helmet speakers are once again fully contacting your ears and centered on them after
putting your helmet on. If they are not centered, reposition the XSound 3 inside your helmet.
• If they do not make good contact, place a Foam Pad Spacer (C) in between the helmet and the XSound 3.
• For an increase in comfort, try placing the Comfort Fit Covers (E) over the Foam Covers (D).
You may sometimes find that after putting on your helmet, your ears
may be folded against the speakers. This will prevent the XSound 3
from making full contact on them, resulting in poor audio quality and
lower volume. To remedy this, IASUS has included the Ear Tab.
To use, insert the tab on either side of your helmet’s eye port. Slide it
between the XSound 3 and the folded ear until it is unfolded.
For easy transport, the Ear Tab can be conveniently
secured to your keys with the included key chain fob.
For more help and troubleshooting, please visit our website
iasus-concepts.com
or contact us at
No Sound
• Check your audio source device is turned on.
• Check that the volume is turned up.
• Check the 3.5mm connector(s) is fully inserted.
Crackling noise
and/or distortions
•
Check that the volume is not set too high on audio source device.
•Ensure speakers are contacting and centered on your ears.
•Use foam pad spacers if necessary.
•If ears are folded, use Ear Unfolding Pad.
Low volume, and/or lots
of treble
•Ensure speakers are contacting and centered on your ears and use foam pad spacers if necessary.
•If ears are folded, use Ear Unfolding Pad.
T E S T I N G T H E I N S T A L L A T I O N
