Modello - Modèle - Model
Modell - Modelo
COUNTER 21 / COUNTER 50 / COUNTER 68 /
COUNTER 98
Fabbricante - Constructeur
Manufacturer - Hersteller
Fabricante
EPTA S.p.A. - Sede legale
Via Mecenate, 86 - 20138 Milano – Italy
Capitale € 68.515.000 - R.E.A./MI – 1730229
Registro delle Imprese e Cod.Fiscale n. 04160730968
Partita IVA 04160730968
PAGE
19/64
N° DOC
10. STORAGE AND DISMANTLING
WARNING! Use protective gloves during unpacking and installation
operations.
During unloading and movement operations, avoid tilting the machine and avoid sudden
manoeuvres.
Keep all packaging away from children. For each subsequent handling of the
cabinet, the use of the wooden platform is recommended. Carefully remove the packaging,
taking care not to damage the components and not to throw away those that will be needed
for assembly. Keep all packaging away from children.
ATTENTION! After unpacking, check that the appliance has not suffered
damage during transportation.
12. CHOICE OF THE INSTALLATION SITE
In selecting the place of installation, ensure that the following instructions are observed, this
being vital for proper and troublefree working of the cabinet:
•
Do not install the cabinet in the vicinity of heating radiators or other heat sources.
•
Do not install the cabint where it is exposed to direct sun light (e.g. through windows).
•
Do not expose the refrigeration unit to air currents from fans, open doors, conditioning units.
•
Keep the air intake and outlet area around the plinth area of the cabinet clear of cartons
and other obstacles.
•
It is necessary taht the condensing unit obtai8ns a good circulation of air around it; also
the area around the condensing unit should not be obstructed by boxes or other objects;
keep a distance from the wall of
10 cm
. at least.
11. ISTRUZIONI PER IL DISASSEMBLAGGIO
Per il disassemblaggio occorre rivolgersi ad operatori professionali.
Il gruppo Epta, da sempre animato da una particolare attenzione per l’ambiente, mette a disposizione
degli utenti i manuali di smantellamento e trattamento dei rifiuti dei banchi frigoriferi plug-in,
scaricabili di seguito.
•
Manuale di smantellamento banchi plug-in aperti
https://www.eptarefrigeration.com/sites/default/files/disassembly_
manual_open_cabinets_epta.pdf
•
Manuale di smantellamento banchi plug-in chiusi
https://www.eptarefrigeration.com/sites/default/files/disassembly_
manual_closed_cabinets_epta.pdf
9.
TRANSPORTATION
The cabinet is contained in a specially crated package that enables transportation by the
use of fork-lift trucks. For each subsequent handling of the cabinet, the use of the wooden
platform is recommended.The unit is shipped anchored onto a wooden base and protected by
corner posts, cardboard top and nylon wrapping.
It must only be handled using a fork lift truck with adequate power to the load.
Positioning the appliance horizontally or on its side or upside down is to be strictly avoided.
Handling is reserved to the authorised after-sales service.
The equipment MUST be kept vertical.