Rev. 20220501
4
iArmor
®
Customer Support: [email protected]
(Fig 6) Passenger Front Mounting Bracket installation
(For models without factory threaded inserts on body panel)
Models with factory threaded inserts on body panel (Fig 7):
Attach (1) Passenger Side Mounting Bracket to the threaded
inserts on passenger side front mounting location with (2)
M8x1.25-30 Hex Bolts, (2) M8 Lock Washers and (2) M8 Large
Flat Washers,
(Fig 8)
. Do not fully tighten hardware at this time.
(1) M8X1.25-30 Hex Bolt
(1) M8 Lock Washer
(1) M8 Large Flat Washer
(Fig 5) Thread Plastic Washer onto Bolt Plate to hold Bolt
Plate in position
M8 Plastic Washer
(1) M8 Bolt Plate
(1) M8 Large Flat Washer
(1) M8 Lock Washer
(1) M8X1.25Hex Nut
Front
(Fig 7) Passenger Side Front Mounting Location
(Example for models with factory threaded inserts)
Fron
t
Factory Threaded In-
serts on Body Panel
(Fig 8) Passenger Front Mounting Bracket installation
(For models with factory threaded inserts on body panel)
Fron
t
STEP 3
Attach (1) Passenger Side Support Bracket to the installed Pas-
senger Side Mounting Bracket with (1)M8x1.25-30 Hex Bolt, (2)
M8 Large Flat Washers and (1) M8X1.25 Nylon Lock Nut,
(Fig
9)
.
Rotate and attach the support bracket to the back of the pinch
weld. Line up the slots on the top of the Support Bracket with
the (2) factory holes on the pinch weld. Secure the Bracket to
the back of the pinch weld with (2) M6X1-25 Hex Bolts, (4) M6
Large Flat Washers and (2) M6X1 Nylon Lock Nuts,
(Fig 10)
.
Do not fully tighten hardware at this time.
(2) M8X1.25-30 Hex Bolts
(2) M8 Lock Washers
(2) M8 Large Flat Washers
(M8 Bolt/Nut Plate not required)
