5
PLAYBACK MODE
Playback mode:
The user can set up 5 voltages that can be played back over time. Each one of the 5
has a time in seconds associated with it.
At the bottom of the screen is the menu.
1-5=EDIT
EDIT VOLTAGE / TIME:
Press 1, 2, 3, 4 or 5 to edit the voltage and time for that line. The edit feature is
enabled when the playback mode is inactive (not running).
To set line 1 to 1.23456 Vdc and for a specified time of 8 seconds:-
E.G.
1
1.23456
(no need to press ENTER)
08
(no need to press ENTER)
Changes made are saved to EEprom when existing playback mode.
*
=LP
ENABLE/DISABLE LOOP MODE:
If loop mode is enable then when playback is running and line 5 finishes it will loop
around to the start again automatically.
With loop mode turned off, playback terminates when line 5 finishes.
LP will appear at the top of the screen when loop mode is enabled.
0=EXIT
EXIT:
Exit back to the main menu.
#=STOP
START/STOP PLAYBACK:
Start and stop playback.
When running, the current time in seconds is displayed at the top right corner of the
screen.
Notes:
1. The battery voltage is displayed at the top of the screen for convenience.
2. Setting a time of 0 seconds will effectively mean that line is skipped.
3. A ‘
*
’ appears against the line currently in operation.
