SW-4000T-MCL User Manual (2.0)
Main Functions
- 48 -
To Use the Shading Correction Function
The function is turned ON/OFF via serial communication. This function is not dependent on the
operation mode but is effective when used during actual use.
Note:
You can save the setting, and have it applied whenever the power is subsequently
turned on. For details on saving the setting, see
.
1. Select the shading correction mode (
FlatShading
or
ColorShading
) in
ShadingCorrectionMode
.
2. In
ShadingMode
, select the user area (User1 - 3) where you save the shading correction
data.
Note:
You cannot perform calibration when
Off
is selected.
3. Display a white chart under a uniform light and execute
PerformShadingCalibration
.
Black Level Correction
Related Setting Items:
Black level correction is a function for adjusting the setup level. When this function is used, the
following is performed for the gain mode setting.
l
DigitalAll: Min = -133, Max = 255
l
DigitalRed: Min = -64, Max=64
l
DigitalBlue: Min = -64, Max=64
