SW-4000T-MCL User Manual (2.0)
Preparation
- 27 -
Step 7: Save the Settings
Related Setting Items:
The configured setting values will be deleted when the camera is turned off. By saving current
setting values to user memory, you can load and recall them whenever necessary. You can save
up to three sets of user settings in the camera. (User Set1 to 3)
Note:
For the details on the short ASCII commands required to configure the save/load
settings, see
Save the User Settings
1. Stop image acquisition. Settings can only be saved when image acquisition on the camera
is stopped.
2. Specify the storage location (UserSet1 - UserSet3) using the
UserSetSave
command and
save the current camera settings.
