IAG IDWI4B, Installation And Operation Manual, Page: 32 / 49

QUICK REFERENCE GUIDE EN
Improper Loading Of Dishware
17 9207 01 00_AA
Half Load (1/2) button
When there are few dishes, you press this button after pressing
the programme selection button. When turning the dishwasher on,
the indicator light on the button lights up. This function helps you to
save water and energy.
Start/cancel button
You use this button to start the selected program; the light on the
button lights up.
Stop the program with the start / cancel button if you would like to
open the door once the dishwasher’s washing program is running.
How to cancel the washing program
To cancel a programme while the machine is operating:
Open the door.
! Care must be taken when opening the door, as steam will escape.
Press the Start/Cancel button for 3 seconds. Start/Cancel indicator
light will start flashing. Close the door. The machine will drain
the water inside the machine for 45 seconds. The programme is
cancelled when Start/Cancel indicator light goes off. Then you can
choose and start a new programme.
! Important:
Depending on the stage of the programme you have cancelled,
there may be detergent residue or rinse aid inside the machine and
on the load. Make sure the items in the dishwasher are not used
before washing properly.
How to change the washing program
To change the program selection while the machine is operating
open the door.
! Care must be taken when opening the door, as steam will escape.
Press Start/Cancel button. The indicator light will go off.
Select the new program. Press Start/Cancel button. The indicator
light will be on and close the door new program will start.
! Important:
The new program will NOT start right from the beginning. It will start
from the stage last carried out by the previous program selection.
! Warning
Depending on the length of the terminated program detergent and
rinse aid may still be in the dispensers.
On/off button
Push in the on/off button and check that the indicator light comes
on.
Rinse aid level indicator light
If the indicator light comes on, you have to refill
rinse aid (If applicable).
You can also tell whether rinse aid must be
refilled by looking at the rinse aid dispenser.
When the visual fill indicator is dark, there is
enough rinse aid in the dispenser.
When the colour is light, open the dispenser and
refill rinse aid.
Program selection buttons
Use the program selection button to select the desired program.
The corresponding program light lights up.
Visual Indicator
Rinse aid level indicator light
LED progress indicator lights
On/Off button
1
2
3
4
5
6
Programme selection button
Start/Cancel button
Half Load (1/2)