IAG Performance | 1203 Baltimore Blvd. Westminster, MD 21157 | Ph: 410-840-3555 | www.iagperformance.com
43
51. Place another zip tie loosely on the 3” length of
breather hose end, then slide the 3” breather hose onto
the 5/8”port plastic drain fitting located on the top of the
engine as shown.
Next route the other long end of the 5/8” hose under the
turbo support bracket and to the AOS lower side port. Trim
the hose to the correct length and place it on the lower
port securing it with a zip tie. Make sure to trim the excess
zip tie lengths off.
