IAD_DGS_X21_10EP
System setup
1
INSTALL
the AC power cord
→
Immediately, the
Status LED
on the main unit lights up
2
You should see the player boot up screen as
shown in right
3
WAIT
while player boots up
→
once you see “Basic settings” on screen,
the unit is ready for content update or menu
configuration
4
PLUG IN
a USB mouse to the unit’s USB port
5
Enter
the corresponding configuration option
by moving the mouse
cursor over the configuration and click on the option to enter
→
Using the USB mouse, click on “Wireless LAN” to enter Wireless
configuration and provide security information to connect to your
wireless access point
→
find and set the correct time/date AND time zone
.
IMPORTANT
: time zone must be set correctly in the menu or via
management software for scheduled playback
→
(OPTIONAL)
Set a Password
in the menus to prevent unauthorized
changes.
IMPORTANT
: Password will be asked while enter the setup menu
during playback
6
Click
Set content
button to configure your signage appliance to the
content service if needed
