`
Copyright© 2019 IAdea Corporation
8
XDS-1078-A9 10.1” Signboard
User Guide
4.
Insert the USB stick into display and wait for yellow dot on upper right corner to
stop blinking.
5.
Within the "DEBUG" folder, is a folder with a string of number as its name. If the
string of numbers are all zeros, the debug log has not been collected properly.
Repeat step 1-4 again and make sure to wait until stop blinking.
6.
Zip the "DEBUG" folder and send to IAdea Support Team.
Factory resetting the room panel will result in removal of all saved contents, passwords,
and configurations in settings. Please refer to the steps below to complete the room
panel factory resetting process:
1.
Use a pen to press and hold the reset button – do not release until Step 4.
2.
Insert the power cord.
3.
Wait 30 seconds for the system reboot indicating your data is erased.
4.
Release the reset button and your room panel will initialize in factory default
state.
Reset system to factory default