IACER Srl
20
MNPG53-07
5.
At the end of the therapy the device will automatically return to
the Program menu screen.
ATTENTION:
The device recognizes the correct connection of the
applicators. During the treatment, below the magnet icon, the
connection status is displayed. The presence of the symbol next
to the channel number (Ch1 or Ch2) confirms the correct
connection and recognition of the applicator. The symbol
X
next to
the number of the channel (Ch1 or Ch2) warns of the incorrect
connection of the applicator, its absence or its incorrect functioning
(see
Functioning control
paragraph).
ATTENTION
: it’s possible to temporary stop the therapy at any time
by pressing OK key at least for 2 seconds. Press again OK key to
continue the treatment. During the pause time green led turns off
until the treatment restarts
.
ATTENTION:
it’s possible to get out from the treatment at any time
by pressing once
key, the screen will display the basic settings
(step 2). By pressing again
key the screen will display programs
menu (step 1).
SETTABLE PROGRAMS INSTRUCTIONS
MAG2000 PLUS allows the user to modify the preset parameters in the
programs associated with the pathologies. After choosing the desired
program, follow these steps to change the parameters related to the
therapy time and the intensity of the magnetic field:
1.
In the program detail press OK button to select the moving
wrench icon on the left side
.
2.
Press
and
buttons to adjust the desired therapy hours
(from 0 to 24) and confirm by pressing OK. Screen will highlight the
therapy minutes.