STEP 4 - INSTALL THE LEG EXTENDERS.
INSTALL THE FLOOR GLIDES INCLUDED IN THE HARDWARE KIT INTO THE
BLACK PLASTIC INSERT IN THE END OF THE LEG EXTENDERS. HOLDING
THE LEG EXTENDER BY THE FLOOR GLIDE, PLACE THE EXTENDER INSIDE
OF THE END SECTION PEDESTAL LEGS SO THAT THE ROW OF THREADED
HOLES IN THE SIDE OF THE EXTENDER ALIGN WITH THE TWO HOLES IN THE
INNER PORTION OF EACH LEG. THE EXTENDERS ARE ADJUSTABLE ON TWO-
INCH INCREMENTS. SECURE THE EXTENDERS AT THE DESIRED HEIGHT
WITH TWO OF THE SMALLER HEX HEAD 1/4 -20X3/4 BOLTS (Item 1) WITH 1/4
FLAT WASHERS (Item 2) THREADED INTO EACH LEG EXTENDER. SNUG UP
THE BOLTS, BUT BEFORE TIGHTENING THE BOLTS COMPLETELY, APPLY
DOWNWARD PRESSURE ON THE FLOOR GLIDES TO TAKE ANY PLAY OUT OF
THE EXTENDERS. SMALL ADJUSTMENTS CAN BE MADE WITH THE FLOOR
GLIDES ONCE THE BENCH IS UPRIGHT. (SEE FIGURE 5)
TURN THE BENCH UPRIGHT, MOVE THE BENCH INTO PLACE AND USE THE
FLOOR GLIDES IN THE LEG EXTENDERS TO LEVEL IT.
5