2.
Intended use
2.1 Operating restrictions
2.1.1 Do not damage the ultrasonic radiators located behind the grid by foreign objects. Damage of the radia-
tor may cause improper appliance operation, may reduce its efficiency or disable.
2.1.2 When the appliance is in use do not cover ultrasonic radiators with any objects, it may disable the appli-
ance.
2.1.3 Do not open or try to disassemble the appliance.
2.1.4 Do not put water and foreign objects inside the appliance.
2.2 Operating instructions
2.2.1 To turn the appliance ON put a plug into a socket. After that the power indicator starts to flash (2).
2.2.2 It is important to choose the right place for the appliance installation to achieve the maximum effect.
Take into account the following:
-
it is important to keep the appliance safe from natural phenomena (rain, snow) when installing it outdoors,
do not block ultrasonic radiators;
- when putting the appliance in a house you should concern that the appliance can control the rodents in stat-
ed area only when it is located in empty house of a similar size. If the area is divided into several rooms or filled
with shelves and partitions it would be needed several appliances placed all over the area;
- installing the appliance at the distance of 60-70 cm from the ground will bring to maximum efficient opera-
tion process. For putting a plug into a socket it is possible to use extensions cords.
Do not use homemade or de-
fective extension cords – it may disable the appliance and cause short circuit!
3
Technical maintenance
3.1 Technical maintenance consists in cleaning the surface of the appliance as needed.
3.2 Current repair. Types of faults.
Typical faults and possible solutions are specified in Table 2.
Тable 2
Description of the fault
Possible reasons
Possible solution
When turning the appliance ON the in-
dicator does not light
There is no supply-line
voltage
To check electric mains.
Appliance is defective
Return the appliance to the re-
pair department.
