- press and hold the button
until the display switches to the clock mode – on-time is set.
Note:
To set the device on-time on other days of the week, repeat the same procedure for each of the days.
b) The device off-time set up on Tuesday at 20:08, 07:10
- press and hold button
until the first digit on display starts to flash;
- repeatedly press the button
to select the number 2, corresponding to Tuesday, the number keeps
flashing at that time;
- in order to set up the device off-time on Tuesday, press and hold the button
until the following images
will be alternately shown on the display within 1-second interval:
and
- to s
et up the device off-time - "07 hours" - repeatedly press the button
and "10 Minutes" -
press the button
, numbers continue to flash while setting up. Following images will be alternate-
ly shown on the display within 1-second interval:
and
- press and hold the button
until the display switches to the clock mode – off-time is set.
Note:
To set the device off-time on other days of the week, repeat the same procedure for each of the days.
2.2.2 For resulting expelling effect, it is important to choose the right place for the device. Please consider
the following factors:
- ultrasonic waves reflect from solid materials and are absorbed by soft materials;
- ultrasonic waves do not pass through walls or partitions;
- maximum effective device functioning is obtained by placing it at a distance of 60-70 cm from the ground
(floor).
2.2.3 The result of device usage in closed space - the complete disappearance of pests is observed after 14 of
continuous operating.