1.3.2 Location of controls is shown in Figure 2.
Figure 2 – Location of controls
The housing of the Product is made of high impact ABS plastic, it has:
- ultrasonic emitter (1);
- power indicator (2).
1.4 Structure and Functioning
1.4.1 The Product runs under command of microcontroller with embedded software.
1.4.2 The Product generates ultrasonic emission which is intolerable for rodents. Permanent change of emis-
sion settings excludes any rodent habituation to the Product.
2
.
Intended use
2.1 Operating restrictions
2.1.1 Do not damage the ultrasonic emitters located behind the grid by foreign objects. Damage of the emitter
may cause improper operation of the Product and may reduce its efficiency or disable.
2.1.2 When the Product is operating, do not cover ultrasonic emitters with any objects as it may disable the
Product.
2.1.3 Do not open or try to disassemble the Product.
2.1.4 Do not put water and foreign objects inside the Product.
2.2 Operating instructions
2.2.1 To turn the Product ON put a plug into a socket. After that the power indicator starts to flash.
Summary of Contents for Grad 506
Page 1: ...Ultrasonic rodent repeller Grad 506 User Manual...
Page 7: ......
