Note
Annexxus 301, 301C, 301C2M, 301D2M
support 1 control output. Annexxus 304
supports 2 control outputs.
4. Check off the desired video channels to start video recording whenever sensor is triggered. Make sure to set corres-
ponding video Channel to Alarm Recording. See Video Recording Schedule Setup section for more information.
2.9.2. Control Output(s) Setup
Annexxus 301-series support one (1) control output, while Annexxus 304 device supports up to two (2) control outputs.
Before configuring control output settings, make sure the control outputs are properly connected to the Annexxus module.
Each control output can be configured to operate based on a schedule.
Annexxus module can be configured to activate control output(s) in response to sensor activity, motion detection, video
loss, view tampering, or the detected exception. See related sections of the manual for more information.
Caution
Control outputs must use their own power
supply.
2.9.2.1. Control Schedule
Each Annexxus control output can be limited by a user schedule. By configuring the control output schedule, the user can
select specific days and/or times when the control output will be triggered in response to user settings (e.g. motion de-
tection). For example, the warehouse manager may choose to sound the alarm in response to detected motion only during
the after hours or on the weekends only.
Control schedule can be configured for each day of the week. Furthermore, up to 4 individual time frames can be configured
for each daily control output schedule.
To configure the schedule for the control output, do the following:
1. From the
Control Output
drop-down menu, select the control output. Make sure the control output is properly
connected to the Annexxus device in accordance with the connection diagrams.
55
Control Output(s) Setup
Chapter 2. Remote Connection via SRX-Pro/iP-Pro
Server
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at