3. Click
Confirm
to save the settings and to close Sensor Input window.
2.9.1.4. Associate Sensor Input with PTZ Preset
Each Annexxus sensor input can be associated with PTZ Preset/Preset Pattern/Auto Pattern. Applicable only to Annexxus
301/304 models.
In addition to being able to record video and to generate alarm logs based on sensor activity, it is also possible to associate
sensor activity with PTZ Preset, Preset Pattern or Auto Pattern.
To associate Sensor Input with PTZ Pattern, do the following:
1. Click
Associate With...
. Sensor Input window will be displayed.
2. In PTZ Association, select the associated PTZ video channel.
Important:
Video channels must be properly connected to the Annexxus module and must be also configured in the
PTZ setup tab, where PTZ Address, PTZ Protocol and Baud Rate can be assigned to each PTZ video channel.
3. Check off
Preset
checkbox and enter the Preset number in the corresponding combo box. All presets must be con-
figured through PTZ channel OSD menu.
OR
Check off
Preset Pattern
checkbox and enter the Preset Pattern number in the corresponding combo box. All preset
patterns must be configured through PTZ channel OSD menu.
OR
Check off
Auto Pattern
checkbox to associate the sensor input with the Auto Pattern on the selected PTZ channel.
Auto Pattern must be configured through PTZ channel OSD menu. Each time the selected Sensor Input is activated,
the Auto Pattern of the connected
54
Sensor Input(s) Setup
Chapter 2. Remote Connection via SRX-Pro/iP-Pro
Server
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at